Yealink T46G Configuration Guide

STEP 1

Press the Menu button your handset then press 1. This will display the handset's IP address under the title ‘IPv4’. E.g. IPv4: 192.168.1.125

STEP 2

Type the handset’s IP address into any browser window, press Enter to access the phone's web portal and use the following login credentials.

Username: admin

Password: admin

STEP 3

Click on the “Accounts” Tab, then click on the “Register” in the menu.

STEP 4: Use the information provided by SiPalto

Set the "Line Active" as “Enabled”
Set the "Label" as the Extension number or something unique that defines the phone.
Set the "Display Name" to something that defines the phone e.g. Manager
Register Name: <This is the username provided by SiPalto>
Username: <Username provided by SiPalto, same as above>
Password: <Provided by SiPalto>

SIP Server 1

Server Host:<Information provided by SiPalto>
Transport: <Select UDP>
Server Expires: < 300 >
Server Retry Counts: <3>

Click "Confirm" once all the information is entered. The "Register Status" will change to "Registered" once the registration if successful.

STEP 5: CODECS